高压处理对BiSrCaCu2Oy超导电性的影响

 本文在高T_c超导体BiSrCaCu₂O_y常压制备的基础上，研究了热压烧结和冷压处理对其形成、结构及超导电性的影响，并与常压结果进行了比较。结果表明，高压可以使样品的合成时间缩短，合成温度降低。但同时它也抑制了晶格参数较大的相（高T_c相）的形成，使小晶格参数的杂相含量增多。对于提高样品的超导电性而言，1.5 GPa时一个较好的压力点。     

热辐射驱动烧蚀平面金靶的数值定标定律

利用一维辐射流体力学编码数值研究了辐射烧蚀波在平面金靶中的传播情况,并在常温边界条件下得到了辐射流、烧蚀压、质量烧蚀率和特征等离子体密度的定标定律。     

光辅助超高真空CVD系统制备SiGe异质结双极晶体管研究

介绍了采用紫外光化学汽相淀积(UVCVD)、超高真空化学汽相淀积(UHVCVD)和超低压化学汽相淀积(ULPCVD)技术研制的化学汽相淀积(CVD)工艺系统,简称U³CVD系统.应用该系统,在450℃低温和10^-7Pa超高真空环境下研制出了硅锗(SiGe)材料和硅锗异质结双极晶体管(SiGe HBT)材料.实验表明,该系统制备的SiGe HBT材料性能良好.     

Gas solubility of carbon dioxide in poly(lactic acid) at high pressures: Thermal treatment effect

The sorption of carbon dioxide in glassy Poly(lactic acid) (PLA) films was studied by quartz crystal microbalance (QCM) at high pressures. Two thermal treatments, melted and quenched, were performed in PLA with two different L:D contents, 80:20 and 98:2, films and compared with a third thermal protocol, annealed, and used in a previous work. The results obtained show that for pressures higher than 2 MPa, the carbon dioxide solubility is larger in PLA 80:20 than in PLA 98:2, indicating that the L:D plays a dominant role on this property. The thermal treatments only affect the gas solubility in PLA 98:2. Sorption isotherms at temperatures 303, 313, and 323 K, below the glass transition temperature of the polymer, and pressures up to 5 MPa were measured and analyzed with three different models, the dual‐mode sorption model, the Flory–Huggins equation, and a modified dual‐mode sorption model where the Henry's law term was substituted by the Flory–Huggins equation. This last model performs especially well for CO₂ in PLA 80:20, due to the convex upward curvature of the solubility isotherms for that system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 616–625, 2007     

现代热力学的完整分类系统--非平衡非耗散热力学新领域

在同一体系中同时有多个不可逆过程时，不可逆过程之间会有相互影响，原来的非自发过程有可能在其他自发过程的影响下得以进行，这种现象就称为热力学耦合或反应耦合，长期以来，经典热力学把热力学第二定律的等式作为平衡体系的充分必要条件，其中隐含了一个前提性的假定，即经典热力学的对象只限于非耦合的体系，摈弃这一隐含的前提性假定以后，热力学自身就发展成为一个现代热力学的完整学术体系，适用于任何宏观体系（包括极其复杂的生命体系），现代热力学的完整学术体系中包含了一个崭新的非平衡非耗散热力学新领域，由于该领域属于热力学第二定律的等式部分，因此可以定量计算，并得到一系列理论计算的非平衡相图，与文献上报道的激尖低压金刚石合成等的大量实验数据相符。     

小长径比垂直管气液两相流动特性分析

实验观察了小长径比垂直上流管内流型及特点,并对管入口处的压力波动特性和系统的压差波动特性进行了试验研究.结果表明:小长径比(L/D)垂直管内流型表现为泡状流、塞状流、乳沫状流、环状流和液束环状流;分别增加管线中的气量、液量,或者同时增加气液流量,均会造成垂直管入口处压力波动的均值和最大压力的增加;压力信号的概率密度(PDF)大部分呈双峰分布,也存在单峰和多峰分布;差压信号的概率密度符合正态分布,其功率谱密度同压力信号相比具有频率波动范围宽、幅值小的特点.     

Comparison of detection efficiencies of negatively charged gold-alkanethiolate-, gold-sulfur- and gold-clusters in ToF-SIMS

In order to improve quantification of high mass ions, the influence of cluster composition on detection efficiencies has been studied using a TOF-SIMS IV with the extended capability of postaccelerating ions up to 20 keV. In this experimental study, we focus on the comparison of detection efficiencies for three types of negatively charged secondary cluster ions: gold-alkanethiolate-clusters (Au_xM_y), gold-sulfur-clusters (Au_xS_y) and gold-clusters (Au_x). The clusters were sputtered from self-assembled monolayers of hexadecanethiols on gold substrates using 10 keV Ar⁺ primary ions. The detection efficiencies were derived on the basis of a function for the secondary electron yield and a fourth-order approximated Poisson probability distribution for electron propagation and amplification within the microchannel plate.In addition to the well-known dependence of detection efficiencies on ion mass and energy, which has already been studied for positively charged ions, we were able to show a similar behaviour for the investigated negatively charged secondary ions. We have observed major variations among the three types of clusters at similar mass and energy as predicted in a theoretical approach. The observed differences are due to the different composition of the investigated clusters which has a major influence on the kinetic ion induced electron emission within the microchannel plate. For the first time it was possible to experimentally verify these predictions for detection efficiencies.     

聚变等离子体中的快离子压强

本文运用Fokker-Planck方程的慢化近似,考虑存在多种离子成份(包括杂质),假定它们具有共同的温度,我们得到了聚变产生的快离子压强的简单封闭形式表示式。表明在典型的工作温度下(～60keV),D-~3He等离子体中聚变产生的快离子压强约为本底热压强的20％,这与D-T等离子体工作在20keV时的比值几乎相同。因此,D-~3He和D-T在它们相应的预期工作温度下,它们各自的快离子压强对总压强的影响是类似的,然而在更高的温度下,这个比值将变得更大。     

碳化硅压腔和高压下的中子衍射

使用宝石级碳化硅晶体作为压砧材料，成功研制出了碳化硅压腔（MAC），并应用全景式MAC进行了高压下物质的中子衍射实验研究。结果表明，MAC是一种既能产生高的压力又具有大的高压样品室的装置，特别适合于高压下的中子衍射研究。     

Nonlinear modelling and control of a common rail injection system for diesel engines

Modern trends in designing mechatronic systems call for a synergic design of the separated subsystems (mechanic, electronic parts, control modules, etc.) concurring to the overall performance. Following this point of view, this paper presents a control oriented model and a nonlinear control design for a Common Rail injection system. First a model is developed, which is tuned in a virtual simulation environment, representing the injection system in details in a reliable replication of reality. Then a sliding mode control is developed. Both the model of the injection process and of the control law are validated by a virtual detailed simulation environment. The prediction capability of the model and the control efficiency are clearly shown.